Sway bars

Sway bars

From BeamNG

Revision as of 20:26, 15 May 2016 by Aljowen (talk | contribs) (Modifying a sway bar)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Sway bars in real life

Sway bars are used to mitigate body roll in cars. An explanation of how they work in the real world can be found in the video linked below. It also gives some useful information about the limits of their effect.

https://www.youtube.com/watch?v=VoSNAkteXjY

Video credit goes to: Matthew Eddy on YouTube.

Sway bars can also be known as Anti Roll Bars

Sway bars in BeamNG

Creating a sway bar

In BeamNG a Sway Bar can be implemented by creating a single node above the wheels in the centre of the vehicle, then add a beam connecting it to each wheel and two beams connecting it to the chassis.

In the image that is linked below you can see how this is implemented in the Ibishu Covet.

Covet SwayBar.jpeg Top down, front of car is top of image

Covet SwayBar side.jpeg Pointing from the cabin towards the front of the car

Modifying a sway bar

You can adjust how effective you want the sway bar to be based upon the spring values of the beams connecting the pivot to the wheels. By lowering the spring value you allow each wheel more independent movement. By making it stiffer you make the vehicle sway less, this comes at the sacrifice of ride quality.